LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Engine Block >> Damper-Vibration >> Removal >> Crankshaft Damper

Crankshaft Damper

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Crankshaft Damper
GC0021100Courtesy of CHRYSLER LLC
1 - PULLER 1026
2 - CRANKSHAFT DAMPER REMOVAL INSERT 6827A
  1. Remove accessory drive belts. Refer to REMOVAL .
  2. Remove lower splash shield.
  3. Remove crankshaft damper bolt.
  4. Remove damper by using Puller 1026 (1) and Crankshaft Damper Removal Insert 6827A (2). See Fig 1.
scientia non olet · About LEMON Manuals