LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Engine Block >> Crankshaft >> Standard Procedure >> Measuring Crankshaft End Play

Measuring Crankshaft End Play

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Crankshaft End Play - Typical
GC0021510Courtesy of CHRYSLER LLC
  1. Mount a dial indicator to front of engine with the locating probe on nose of crankshaft. See Fig 1.
  2. Move crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move crankshaft all the way to the front and read the dial indicator. Refer to SPECIFICATIONS . for end play specification.
scientia non olet · About LEMON Manuals