Structural Collar - Manual Transaxle Equipped
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - HYDRAULIC CLUTCH SLAVE CYLINDER |
| 2 - TRANSAXLE |
| 3 - POWER STEERING HOSE |
| 4 - STRUCTURAL COLLAR |
- Raise vehicle on hoist.
- Remove bolts attaching collar and clutch slave cylinder (1) to transaxle (2). See Fig 1.
- Remove remaining bolts attaching structural collar (4) to oil pan and transaxle. See Fig 1. Remove structural collar (4).