LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (2.4L Engine (Service Information)) >> Engine Block >> Collar-Structural >> Removal >> Structural Collar >> Structural Collar - Automatic Transaxle Equipped

Structural Collar - Automatic Transaxle Equipped

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Structural Collar & Bending Strut (Automatic Transaxle Equipped)
GC0019460Courtesy of CHRYSLER LLC
1 - TRANSAXLE
2 - STRUCTURAL COLLAR
3 - OIL PAN
4 - BENDING STRUT
  1. Raise vehicle on hoist.
  2. Remove bolts attaching bending strut (4) to engine and transaxle (1). See Fig 1.
  3. Remove bolts attaching structural collar (2) to engine, oil pan, and transaxle. See Fig 1. Remove strut and collar.
scientia non olet · About LEMON Manuals