Rocker Arms
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - VALVE SPRING COMPRESSOR 8215A |
| 2 - ADAPTER 8436 |
| 3 - 3/8" DRIVE RATCHET |
- Lubricate rocker arm with clean engine oil.
- Using Valve Spring Compressor 8215A (1) and Adapter 8436 (2) slowly depress valve assembly until rocker arm can be installed on the hydraulic lifter and valve stem. See Fig 1.
- Repeat installation procedure for each rocker arm.
- Install spark plugs.
- Install cylinder head cover. Refer to INSTALLATION .