Section 207 (Exhaust System & Turbocharger): Adjustments: Alignment
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
A misaligned exhaust system is usually indicated by a vibration, rattling noise or binding of exhaust system components. These noises are sometimes hard to distinguish from other chassis noises. Inspect exhaust system for broken or loose clamps, heat shields, insulators and brackets. Replace or tighten as necessary. It is important that exhaust system clearances and alignment be maintained.
Perform the following procedures to align the exhaust system.
- Loosen clamps and support brackets.
- Align the exhaust system starting at the front, working rearward.
- Tighten all clamps and brackets once alignment and clearances are achieved.