EVAP Canister
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - NVLD |
| 2 - FUEL TANK |
- Disconnect and isolate the negative battery cable.
- Raise vehicle and support.
- Disconnect electrical connector from natural vacuum leak detection (NVLD) valve (1).
- Remove bolt securing NVLD valve bracket to EVAP canister bracket.
- Remove hoses from NVLD valve.
- Remove bolts and NVLD bracket from NVLD valve.