MAP SENSOR 2.0, 2.4, 2.4L Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manifold Absolute Pressure Sensor

Courtesy of CHRYSLER LLC

The MAP sensor attaches to the intake manifold plenum (1).

Insert sensor into intake manifold while making sure not to damage O-ring seal.
Tighten mounting screws to 2 N.m (20 in. lbs) torque for plastic manifold.
Attach electrical connector to sensor.
Install the negative battery cable.
Install the air cleaner lid and makeup air hose.