LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Fuel System) >> Fuel Injection 2.2L Diesel >> Sensor-Camshaft Position >> Removal >> Camshaft Position Sensor

Camshaft Position Sensor

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Disconnect camshaft position sensor electrical connector.
  4. Remove retaining bolt and remove sensor from cylinder head cover.
scientia non olet · About LEMON Manuals