Fuel Filler Neck

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Filler Tube

Courtesy of CHRYSLER LLC

1 - VAPOR RECIRCULATION TUBE

2 - FILLER TUBE

Install fuel filler tube (2). Connect fuel filler tube hose to fuel tank neck and tighten clamp to 4.1 N.m (38 ins. lbs.).

Fig 2: Splash Shield
Courtesy of CHRYSLER LLC

1 - SPLASH SHIELD
Install the rear half of the inner splash shield.
Lower vehicle.

Fig 3: Fuel Filler Cap
Courtesy of CHRYSLER LLC
Install fuel filler neck screws and tighten to 2.7 N.m (24 ins. lbs.).

Fig 4: Removing/Installing Fuel Filler Neck
Courtesy of CHRYSLER LLC
Install fuel filler tube cap.
Install the negative battery cable.
Install the air cleaner lid and makeup air hose.