Fuel Rail - 1.6L

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Release fuel system pressure before servicing fuel system components. Service vehicles in well ventilated areas and avoid ignition sources. Never smoke while servicing the vehicle. This may result in personal injury or death.

Fig 1: Injector Connector & Wiring Harness

Courtesy of CHRYSLER LLC

1 - FUEL INJECTOR ELECTRICAL CONNECTOR

2 - WIRING HARNESS

Remove air cleaner assembly cover.
Disconnect the negative battery cable.
Disconnect the electrical connectors from the fuel injectors (1).

Fig 2: Fuel Line
Courtesy of CHRYSLER LLC
Remove the wiring harness from the fuel rail brackets.
Remove the fuel line from the fuel rail.

Fig 3: Fuel Rail & Fuel Injector
Courtesy of CHRYSLER LLC
Remove the 2 bolts to the fuel rail at the lower manifold.
Remove the fuel rail
Remove the fuel injectors from the rail.