LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Wiring Diagram Information) >> Wiring Diagram Information >> Terminal >> Removal >> Wire Terminal

Wire Terminal

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow steps for removing terminals described in the connector removal information. Refer to REMOVAL .
  2. Cut the wire 6 inches from the back of the connector.
scientia non olet · About LEMON Manuals