Testing For A Short To Ground On Fuses Powering Several Loads
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to SYSTEM WIRING DIAGRAMS article and disconnect or isolate all components on the suspected fused circuits.
- Replace the blown fuse.
- Supply power to the fuse by turning ON the ignition switch or re-connecting the battery.
- Start connecting or energizing the components in the fuse circuit one at a time. When the fuse blows the circuit with the short to ground has been isolated.