LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Wiper System & Washer System (Service Information)) >> Wipers/Washers >> Arm-Front Wiper >> Removal >> Arm-Front Wiper

Arm-Front Wiper

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Front Wiper Arm
GC0021955Courtesy of CHRYSLER LLC
  1. Place the wiper arm/blades in the PARK position and turn ignition OFF.
  2. Open hood.
  3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the wiper arm nut cap and remove.
  4. Remove wiper arm retaining nut.
  5. Remove the arm from the pivot using a rocking motion while the arm is in an over/centered position.
  6. Clean metal splinters OFF the pivot shafts.
scientia non olet · About LEMON Manuals