Gearshift Boot

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Gearshift Knob

Courtesy of CHRYSLER LLC

1 - GEARSHIFT KNOB

Pull up on gearshift knob (1) with moderate force to remove from gearshift mechanism. See Fig 1.

Fig 2: Removing/Installing Gearshift Boot
Courtesy of CHRYSLER LLC

1 - GEARSHIFT BOOT
Remove shifter boot/bezel (1) assembly from console by lifting up at mounting ring area. See Fig 2.