Reservoir, 2.2L Diesel

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding, see WARNING .

Remove the engine top appearance cover.
Remove the engine air cleaner. Refer to REMOVAL .
Siphon as much fluid as possible from power steering fluid reservoir.

Fig 1: Return Hose Mounting
Courtesy of CHRYSLER LLC

Remove the hose clamp securing the return hose (2) to the reservoir fitting. Slide the hose off the end of the reservoir fitting.

Fig 2: Hoses At Pump & Reservoir

Courtesy of CHRYSLER LLC

1 - FLUID RESERVOIR

2 - SUPPLY HOSE

3 - PRESSURE HOSE

Remove the hose clamp securing the supply hose (2) to the reservoir fitting. Slide hose off end of reservoir fitting.

Fig 3: Power Steering Fluid Reservoir Mounting
Courtesy of CHRYSLER LLC
Remove the mounting bolts securing the reservoir in place. Remove the reservoir.