Pulley-Pump, 2.2L Diesel

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding, see WARNING .

Raise and support the vehicle. Refer to STANDARD PROCEDURE .

Fig 1: Engine Compartment Lower Silencer
Courtesy of CHRYSLER LLC

1 - ENGINE COMPARTMENT SILENCER

2 - ACCESSORY DRIVE BELT SPLASH SHIELD
Remove the lower engine compartment silencer assembly (1) and the accessory drive belt splash shield (2).

Remove the accessory drive belt. Refer to REMOVAL .

Fig 2: Pump Pulley Mounting

Courtesy of CHRYSLER LLC

1 - PULLEY MOUNTING BOLTS

2 - RIGHT FRAME RAIL

3 - PRESSURE HOSE FITTING

4 - PULLEY

Remove the three bolts (1) securing the pulley to the power steering pump. Remove the pulley.