Hose-Supply, 2.2L Diesel

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding, see WARNING .

Disconnect the battery negative (-) terminal.

Fig 1: Engine Top Cover Mounting
Courtesy of CHRYSLER LLC
Remove the engine top appearance cover.
Siphon as much fluid as possible from power steering fluid reservoir.

Remove radiator fan. Refer to REMOVAL .

Fig 2: Hoses At Pump & Reservoir

Courtesy of CHRYSLER LLC

1 - FLUID RESERVOIR

2 - SUPPLY HOSE

3 - PRESSURE HOSE

Remove the clamp securing the supply hose (2) to the power steering pump supply fitting, then remove the hose from the fitting.
Remove the hose clamp securing supply hose (2) to the power steering fluid reservoir (1). Slide the hose off the end of the reservoir fitting and remove from vehicle.