LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Steering System) >> Column >> Shroud-Lower >> Installation >> Lower Shroud

Lower Shroud

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Steering Column Shrouds
GC0042953Courtesy of CHRYSLER LLC
  1. Push the tilt lever (5) downward.
  2. Install the lower shroud (2) over the tilt lever and onto the column.
  3. Position the column tilt (5) at the full-upward position.
  4. Push the tilt lever (5) upward, locking it in place.
  5. Install the screw (3) attaching the lower shroud (2) to the steering column (6).
  6. Position the column tilt at the full-downward position and lock it in place.
  7. Install the upper shroud over the lower shroud, clipping the shrouds to one another.
  8. Install the two screws (4) attaching the upper shroud (1) to the lower shroud (2).
scientia non olet · About LEMON Manuals