Tilt Lever

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Steering Column Shrouds

Courtesy of CHRYSLER LLC

Remove upper (1) and lower (2) steering column shrouds. See REMOVAL .

Fig 2: Identifying Tilt Lever Spring & Nut
Courtesy of CHRYSLER LLC
Place the tilt lever in the released (downward) position.
Remove the spring (1) from the end of the tilt bolt.
Remove the lock nut (2) from the end of the tilt bolt. Make sure the tilt bolt stays in place through the steering column.
Remove the tilt lever (3) from the tilt bolt and steering column.