LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (HVAC Systems (Service Information)) >> HVAC >> Plumbing >> Diagnosis And Testing >> Refrigerant System Leaks >> System Empty

System Empty

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Evacuate the refrigerant system to the lowest degree of vacuum possible (approximately -88 kPa (-26 in. Hg) or greater vacuum). See STANDARD PROCEDURE . Determine if the system holds a vacuum for 15 minutes. If vacuum is held, a leak is probably not present. If system will not maintain vacuum level, proceed to step  2.
  2. Prepare and dispense 0.284 kilograms (10 ounces) of R-134a refrigerant into the evacuated refrigerant system. See STANDARD PROCEDURE  and proceed to step  1 of the System Low procedure.
scientia non olet · About LEMON Manuals