LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (6.1L Engine (Service Information)) >> Seal-Crankshaft Oil-Front >> Removal

Seal-Crankshaft Oil-Front: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Damper Removal
GC0003975Courtesy of DAIMLERCHRYSLER CORP.
1 - Special Tool 1023 Puller
2 - Special Tool 8513A Insert
  1. Disconnect negative cable from battery.
  2. Remove accessory drive belt. Refer to ACCESSORY DRIVE .
  3. Drain cooling system. (Refer to COOLING - STANDARD PROCEDURE) .
  4. Remove upper radiator hose.
  5. Remove radiator shroud attaching fasteners.
  6. Remove radiator cooling fan and shroud. Refer to REMOVAL .
  7. Remove crankshaft damper bolt.
  8. Remove damper using Special Tools 8513A Insert (2) and 1023 Three Jaw Puller (1). (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - REMOVAL) .
    Fig 2: Front Crankshaft Seal Removal
    GC0003982Courtesy of DAIMLERCHRYSLER CORP.
    1 - Special Tool 9071
    2 - Seal
  9. Using Special Tool 9071 (1), remove crankshaft front seal (2).
scientia non olet · About LEMON Manuals