LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (6.1L Engine (Service Information)) >> Manifold - Exhaust >> Removal >> Exhaust Manifold - Right Side

Exhaust Manifold - Right Side

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove exhaust pipe to manifold bolts, remove pipe.
  3. Remove knock sensor.
  4. Remove starter (1) and heat shield (4). See Figure.
  5. Remove power distribution box.
  6. Loosen the power distribution box mounting bracket.
  7. Unfasten, and relocate the wire harness mounted on the right hand inner fender panel.
  8. Remove the top row of bolts from manifold from under the hood.
  9. Remove the bottom row of bolts from manifold from under vehicle.
  10. Remove the manifold from under vehicle.
scientia non olet · About LEMON Manuals