Exhaust Manifold - Left Side
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable.
- Remove exhaust pipe to manifold bolts, remove pipe.
- Remove knock sensor.
- Remove air cleaner housing (1). See Figure.
- Remove coolant bottle, and set aside without removing hoses.
- Remove the top row of bolts from manifold from under the hood.
- Remove the bottom row of bolts from manifold from under vehicle.
- Remove manifold from under vehicle.