LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (6.1L Engine (Service Information)) >> Manifold - Exhaust >> Installation >> Exhaust Manifold - Right Side

Exhaust Manifold - Right Side

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust Manifold Bolt Torque Sequence - Right
G00229357Courtesy of DAIMLERCHRYSLER CORP.
  1. Install manifold gasket and manifold.
  2. Install manifold bolts and torque to 31 N.m (23 ft. lbs.) using the sequence provided. See Fig 1.
  3. Reconnect the wire harness mounted on the right hand inner fender panel.
  4. Reinstall the power distribution box mounting bracket.
  5. Install the power distribution box.
  6. Install the starter (1) and heat shield (4). See Figure.
  7. Install the knock sensor.
  8. Install the exhaust pipe to manifold bolts.
  9. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals