LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (6.1L Engine (Service Information)) >> Lubrication >> Diagnosis And Testing >> Diagnosis And Testing - Checking Engine Oil Pressure

Diagnosis And Testing - Checking Engine Oil Pressure

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove oil pressure sending unit and install gauge assembly C-3292.
  2. Run engine until thermostat opens.
  3. Oil Pressure:
    1. Curb Idle-25 kPa (4 psi) minimum
    2. 3000 RPM-170 - 758 kPa (25 - 110 psi)
  4. If oil pressure is 0 at idle, shut off engine. Check for a clogged oil pick-up screen or a pressure relief valve stuck open.
scientia non olet · About LEMON Manuals