Engine Mounting-Front: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Support Bracket - 5.7L/6.1L

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect negative battery cable.
Raise vehicle.

Remove the generator support bracket (1).

Fig 2: Engine Hydromount RH

Courtesy of DAIMLERCHRYSLER CORP.

1 - Studs

2 - Nut

3 - Hydromount

4 - Studs

Remove hydromount to frame studs (3, 4) and nuts.
Raise engine using suitable jack.
Remove hydromount to bracket fasteners (1, 2).
Remove hydromount from engine.

Fig 3: Engine Mount Bracket LH
Courtesy of DAIMLERCHRYSLER CORP.

1 - Engine Mount Bracket

2 - Bolt

Fig 4: Engine Mount Bracket RH
Courtesy of DAIMLERCHRYSLER CORP.

1 - Engine Mount Bracket

2 - Bolt
Remove engine mount brackets (1), if needed.