LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Body - Interior & Exterior) >> Seats >> Seat Back - Front >> Removal >> Front Seat Back >> Driver Seat 2 Way

Driver Seat 2 Way

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. See REMOVAL .
  2. For the drivers seat illustration. See DESCRIPTION .
  3. Remove the recliner handle (23).
  4. Remove the outboard shield.
  5. Remove the seat buckle bolt (6) and buckle (7).
  6. Remove the inboard shield.
  7. Remove the outboard seat back bolts (22) and the inboard seat back bolts (13).
  8. Remove the side airbag harness (21) retainers and heated seat harness.
  9. Separate the seat back from the seat frame assembly (21).
scientia non olet · About LEMON Manuals