LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Body - Interior & Exterior) >> Seats >> Cover/Foam-Rear Seat Back >> Removal >> Rear Seat Back Cover/Foam

Rear Seat Back Cover/Foam

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat
GC0022511Courtesy of CHRYSLER LLC
1 - REAR SEAT
  1. Remove seat from vehicle.
    Fig 2: Headrest
    GC0022509Courtesy of CHRYSLER LLC
    1 - HEADREST ADJUSTER CAP WITH BUTTON
    2 - HEADREST
    3 - HEADREST ADJUSTER CAP WITH RELEASE TAB
  2. Remove head restraint.
    Fig 3: Rear 40% Seat Back Cover
    GC0022532Courtesy of CHRYSLER LLC
  3. Remove rear seat back.
    Fig 4: Rear Seat Back J-Strap
    GC0022536Courtesy of CHRYSLER LLC
  4. Disengage the J-strap retainer.
    Fig 5: Hog Rings
    GC0022493Courtesy of CHRYSLER LLC
  5. Roll cover upward to hog rings (1). Cut hog rings to free cover.
  6. Roll cover to top of seat back and remove head restraint sleeve guides.
  7. Remove cover from seat back.
scientia non olet · About LEMON Manuals