LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Body - Interior & Exterior) >> Interior >> Header Latch Retainer - Convertible >> Removal >> Header Latch Retainer - Pt-27

Header Latch Retainer - Pt-27

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Partial Up Position
GC0022260Courtesy of CHRYSLER LLC
  1. Place convertible top in the partial up position.
  2. Remove header end molding as necessary.
    Fig 2: Header Latch Retainer
    GC0022412Courtesy of CHRYSLER LLC
    1 - WINDSHIELD SURROUND FRAME
    2 - ATTACHING SCREWS
    3 - HEADER LATCH RETAINER
  3. Remove two screws attaching header latch retainer (3) to windshield surround frame (1).
  4. Remove header latch retainer (3) from vehicle.
scientia non olet · About LEMON Manuals