Switch-Rear Window Defogger
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Position the accessory switch bezel (2) onto the back of the instrument panel center bezel (3).
- Install the two screws (1) that secure the accessory switch bezel to center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
- Install the center bezel onto the instrument panel. Refer to INSTALLATION .
- Reconnect the negative battery cable.