LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Lighting Systems - Exterior (Service Information)) >> Lamps/Lighting - Exterior >> Lamp Unit-License Plate >> Removal >> Lamp Unit-License Plate

Lamp Unit-License Plate

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: License Plate Lamp
GC0022933Courtesy of CHRYSLER LLC
  1. Remove screws attaching license plate lamp (3) to rear bumper.
  2. Remove lamp (3) from bumper.
  3. Disconnect wire connector (1) and bulb (2).