LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (5.7L Engine (Service Information)) >> Solenoid-MDS >> Removal

Section 17 (5.7L Engine (Service Information)): Solenoid-MDS: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the intake manifold. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) .
  3. Remove wiring harness connectors from the MDS solenoids.
  4. Remove hold down bolt from MDS solenoid.
  5. Remove MDS solenoid.
scientia non olet · About LEMON Manuals