LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (5.7L Engine (Service Information)) >> Retainer-Crank Rear Oil - Seal >> Removal

Retainer-Crank Rear Oil - Seal: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seal Retainer Torque Sequence
GC0003976Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative cable from battery.
  2. Remove the transmission. Refer to appropriate Transmission SERVICE INFORMATION article.
  3. Remove the flexplate. (Refer to ENGINE/ENGINE BLOCK/FLEX PLATE - REMOVAL) .
  4. Remove the oil pan. (Refer to ENGINE/LUBRICATION/OIL PAN - REMOVAL) 
  5. Remove the rear oil seal retainer mounting bolts.
  6. Carefully remove the retainer from the engine block.
scientia non olet · About LEMON Manuals