LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (5.7L Engine (Service Information)) >> Mounting-Engine Rear >> Removal

Mounting-Engine Rear: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crossmember
GC0015472Courtesy of DAIMLERCHRYSLER CORP.
1 - Trans Mount Bracket
2 - Crossmember
3 - Bolts
  1. Raise the vehicle on a hoist.
  2. Using a suitable jack, support transmission.
  3. Remove the crossmember (2).
    Fig 2: Transmission Mount
    GC0015471Courtesy of DAIMLERCHRYSLER CORP.
    1 - Bolts
    2 - Trans Mount Bracket
    3 - Trans Mount
  4. Remove the fasteners (1) from the transmission mount (3) to crossmember.
  5. Remove the mount (3).
    Fig 3: Trans Mount Bracket
    GC0015470Courtesy of DAIMLERCHRYSLER CORP.
    1 - Bolts
    2 - Trans Mount Bracket
  6. Remove the transmission mount bracket (2), if required.
scientia non olet · About LEMON Manuals