Removal - AWD

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heat Shield 5.7L AWD Left

Courtesy of DAIMLERCHRYSLER CORP.

1 - HEAT SHIELD

2 - BOLT

Fig 2: Heat Shield 5.7L AWD Right

Courtesy of DAIMLERCHRYSLER CORP.

1 - HEAT SHIELD

2 - BOLT

Disconnect negative battery cable.
Raise vehicle.
Remove the generator support bracket.
Remove the heat shield (1).

Fig 3: Hydromount 5.7L AWD Left
Courtesy of DAIMLERCHRYSLER CORP.

1 - HYDROMOUNT

2 - BOLT

Fig 4: Hydromount 5.7L AWD Right
Courtesy of DAIMLERCHRYSLER CORP.

1 - HYDROMOUNT

2 - BOLT

3 - STUD
Remove engine hydromount to frame nuts, and studs (3).
Raise engine using suitable jack.
Remove engine mount to insulator bolts (2).
Remove engine hydromount (1) from engine.