LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (5.7L Engine (Service Information)) >> Damper-Crankshaft >> Removal

Section 17 (5.7L Engine (Service Information)): Damper-Crankshaft: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from battery.
  2. Remove accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
  3. Drain cooling system (Refer to COOLING - STANDARD PROCEDURE) .
  4. Remove radiator upper hose.
  5. Remove fan shroud (Refer to COOLING/ENGINE/RADIATOR FAN - REMOVAL) .
  6. Remove crankshaft damper bolt.
    Fig 1: Crankshaft Damper Removal
    GC0003975Courtesy of DAIMLERCHRYSLER CORP.
    1 - Special Tool 1023 Puller
    2 - Special Tool 8513A Insert
  7. Remove damper using Special Tools 8513A Insert and 1023 Three Jaw Puller.
scientia non olet · About LEMON Manuals