LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (5.7L Engine (Service Information)) >> Cooler Engine Oil >> Installation

Cooler Engine Oil: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace oil cooler seal.
  2. Lubricate seal and position oil cooler to oil filter adapter, aligning notch to tab.
  3. Install oil cooler connector bolt. Torque connector bolt to 55 N.m (41 ft. lbs.).
  4. Install oil filter.
  5. Connect oil cooler coolant hoses.
  6. Lower vehicle.
  7. Fill cooling system. (Refer to COOLING - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals