LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Instrument Cluster (Service Information)) >> Instrument Cluster >> Installation >> Instrument Cluster

Instrument Cluster

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Cluster Connectors
GC0043624Courtesy of CHRYSLER LLC
  1. Align the cluster in the instrument panel opening. Connect the four electrical connectors.
    Fig 2: Removing/Installing Cluster
    GC0043623Courtesy of CHRYSLER LLC
  2. Push straight back to seat the cluster into the instrument panel.
    Fig 3: Identifying Cluster Retaining Screws
    GC0043622Courtesy of CHRYSLER LLC
  3. Install four screws (1) to the instrument cluster (2).
  4. Install the instrument cluster bezel. Refer to INSTALLATION .
  5. Connect the battery negative cable.
  6. Close hood.
scientia non olet · About LEMON Manuals