LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Ignition System (Service Information)) >> Ignition Control >> Sensor-Camshaft Position >> Removal >> Camshaft Position Sensor 1.6L

Camshaft Position Sensor 1.6L

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Sensor Location
GC0022900Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Relocate the power steering return hose.
  3. Disconnect the electrical connector from the camshaft sensor.
  4. Remove 1 screw from sensor.
  5. Remove sensor.
scientia non olet · About LEMON Manuals