LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Ignition System (Service Information)) >> Ignition Control >> Sensor-Camshaft Position >> Removal >> Camshaft Position Sensor - 2.0/2.4L

Camshaft Position Sensor - 2.0/2.4L

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Target Magnet
GC0019915Courtesy of CHRYSLER LLC
1 - CAM MAGNET/TARGET
2 - CAMSHAFT POSITION SENSOR
  1. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
  2. Remove the negative battery cable.
  3. Disconnect electrical connector from camshaft position sensor (2).
  4. Remove camshaft position sensor mounting screws. Remove sensor.
  5. Loosen screw attaching target magnet to rear of camshaft (1).
scientia non olet · About LEMON Manuals