LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Ignition System (Service Information)) >> Ignition Control >> Coil-Ignition >> Removal >> Ignition Coil - 2.0/2.4L

Ignition Coil - 2.0/2.4L

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

The electronic ignition coil pack attaches directly to the valve cover. See Fig 1.

Fig 1: Ignition Coil Pack - 2.0/2.4L
GC0022901Courtesy of CHRYSLER LLC
  1. Remove the negative battery cable.
  2. Disconnect electrical connector from coil pack.
  3. Remove spark plug cables from coil pack. See REMOVAL .
  4. Remove coil pack mounting bolts.
  5. Remove coil pack.
scientia non olet · About LEMON Manuals