LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Ignition System (Service Information)) >> Ignition Control >> Capacitor-Ignition Coil >> Removal >> Removal - 2.4L Turbo

Removal - 2.4L Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Coil Capacitor - 2.4L Turbo
GC0022913Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Remove the electrical connector from the ignition coil capacitor. See Fig 1.
  3. Remove mounting bolt and remove capacitor. See Fig 1.