LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Clock (Service Information)) >> Clock >> Installation >> Clock

Section 163 (Clock (Service Information)): Clock: Installation: Clock

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Clock Illumination Lamps
GC0015722Courtesy of CHRYSLER LLC
  1. Place lamp and sockets (1) into opening and turn clockwise till detent is felt.
    Fig 2: Identifying Clock Retaining Screws
    GC0015723Courtesy of CHRYSLER LLC
  2. Place the clock into bezel opening and then install the two retaining screws (1).
    Fig 3: Identifying IP Center Bezel
    GC0043059Courtesy of CHRYSLER LLC
  3. Install the Instrument Panel Center Bezel. Refer to INSTALLATION .
  4. Connect the battery negative cable.
  5. Adjust clock to proper time.
scientia non olet · About LEMON Manuals