Switch-Oil Pressure Sensor: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Pressure Switch

Courtesy of DAIMLERCHRYSLER CORP.

1 - OIL PRESSURE SWITCH

2 - ENGINE OIL COOLER

3 - ENGINE OIL FILTER

Raise vehicle on hoist.
Position an oil collecting container under switch location.
Disconnect electrical connector.
Unscrew oil pressure switch (1). See Fig 1.