Seal - Crankshaft Oil Rear: Description
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - SEAL PROTECTOR |
| 2 - SEAL |
| 3 - RETAINER |
The rear crankshaft oil seal (1) and retainer (3) are molded and serviced as an assembly. See Fig 1. This assembly also includes a separate rear crankshaft seal protector (1) that should not be removed before the seal is installed on the engine block. Once the seal protector (1) is separated from the assembly it can not be re-installed on the assembly or reused.