LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (3.5L Engine (Service Information)) >> Ring - Piston >> Removal

Ring - Piston: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upper And Intermediate Rings
GC0001924Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove piston and connecting rod. (Refer to ENGINE/ENGINE BLOCK/PISTON & CONNECTING ROD - REMOVAL) .
  2. Remove No. 1 and No. 2 piston rings from piston using a ring expander tool. See Fig 1.
    Fig 2: Piston Rings
    GC0001919Courtesy of DAIMLERCHRYSLER CORP.
    1 - TOP PISTON RING
    2 - CHROME INTERMEDIATE PISTON RING
    3 - MICRO-NAPIER INTERMEDIATE PISTON RING
    4 - OIL CONTROL RINGS
    5 - SPACER
  3. Remove upper oil control ring side rail. See Fig 2.
  4. Remove lower oil control ring side rail. See Fig 2.
  5. Remove oil control ring expander. See Fig 2
scientia non olet · About LEMON Manuals