Pump - Oil: Disassembly
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - OIL PUMP BODY |
| 2 - OIL PUMP OUTER ROTOR |
| 3 - SCREWS |
| 4 - OIL PUMP COVER |
| 5 - OIL PUMP INNER ROTOR |
- Remove oil pump cover screws (3) and lift off cover (4). See Fig 1.
- Remove pump rotors (2, 5).
- Wash all parts in a suitable solvent and inspect carefully for damage or wear.