LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (3.5L Engine (Service Information)) >> Mount Left - AWD >> Removal

Mount Left - AWD: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Left Engine Mount - AWD
GC0015429Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE MOUNT BRACKET
2 - LEFT ENGINE MOUNT
3 - AIR CONDITIONING COMPRESSOR
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the left front wheel.
  4. Remove the left engine mount to cradle fastener.
  5. Place a jack stand under the engine and support the engine weight.
  6. Remove the engine mount fasteners and remove the mount. See Fig 1.