Left Exhaust Manifold

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Left Exhaust Pipe To Manifold Union

Courtesy of DAIMLERCHRYSLER CORP.

1 - HO2S #1

2 - EXHAUST UNION

3 - HO2S-#2

Disconnect and isolate the negative battery cable.
Raise and support the vehicle.

Separate the front exhaust pipe to manifold union (2).

Fig 2: Left Exhaust Manifold

Courtesy of DAIMLERCHRYSLER CORP.

1 - GASKET

2 - STUD

3 - NUT

4 - BOLT

5 - UPPER HEAT SHIELD

6 - LOWER HEAT SHIELD

7 - EXHAUST MANIFOLD

Lower the vehicle.
Disconnect and remove the oxygen sensor from the exhaust manifold (7)
Remove the exhaust manifold shield (5) retaining bolts, exhaust manifold (7) and discard gasket (1).